The Flat Panel style is made from a frame of Grade A pine,nominally 70mm wide and 20 mm thick.
The frame has scribe and profile joints, and when glued and cramped up,the joint has greater strength than the wood itself.
The inner part of the frame has a small ornamental detail.
The inner part if the frame has a 6mm groove to accept the flat panel.
The panel is made from individual lengths of pine 12mm thick and 150mm wide glued together rebated at the back to slot inside the panel frame.
The panels are cut to size so that they are a good fit and because of the rebating,they combine with the frame to add extra strength the the door.
The doors are individually assembled then placed in a jig to ensure that they are square.Ater being glued and cramped the doors are sanded when the joints are set.
FLAT PANEL DOOR
The maximum size door we make is normally 1400mm high.We recommend that doors larger than 1100mm high are made in a 25mm thick frame as this reduces significantly the possibility of “warp”
Mistermicawber.co, 100 Woodchurch Lane, Prenton, Birkenhead. CH42 9PD. 0151 608 5445
